Innovative Directions for the Use of Drill Cuttings in the Production of Ceramic Materials on the Basis of Milentevoy Clay is a Promising Direction for a Green Economy.

Abstract

As an additive to reduce the drying of the bricks were used drill cuttings produced during oil production. In addition, drilling mud has a high calorific value, so this component it is advisable to use as burnable additives. The purpose of the burnable additives – intensify the firing process, to improve the sintering behavior of the masses and thereby to increase the strength of products and to reduce the density. As a binder, to obtain a ceramic material was used mislava clay, which is a waste of oil shale. The production of ceramic materials from waste products without the use of traditional natural materials contributes to the development of "green" economy. Given that currently traditional natural raw material resources in Russia and other CIS countries are exhausted, involving waste products in an industrial revolution will make highquality ceramic materials. The use of waste products in the production of building materials promotes recycling , environmental protection and reducing environmental impact in the regions.