Buy (625 RUB)
|Generate QR code
Open Access
Subscription or Fee Access
Prospects of Using Jet-Bubble Contact Facilities to Increase Energy Efficiency of Mass-Exchange Apparatuses
https://doi.org/10.18412/1816-0395-2015-7-36-39
Abstract
When performing rectification and sorption processes, one method to increase the energy efficiency is the use of modern contact facilities, which makes it possible to increase the productivity of industrial installations and to lower the prime cost of the unit of the ready product. In recent years, various designs of such facilities possessing a rather high heat-and-mass exchange efficiency appear. They have disadvantages such as a high hydraulic resistance, low efficiency, and complexity in fabrication and repair. The application of jet-bubble contact facilities that we developed will make it possible to prevent the ungrounded increase in the energy consumption in column apparatuses. The question of the scale transition is also solved in this case, which will make it possible to develop the apparatuses of any specified productivity without efficiency lowering. The article represents the results of the investigation into the determination of optimal constructive parameters of the contact facility.
About the Authors
I.N. Madyshev
Nizhnekamsk Chemical-Technological Institute (branch) of Kazan State Technological University “KNITU”
Russian Federation
Post-Graduate Student
Russian Federation
Post-Graduate Student
O.S. Dmitrieva
Nizhnekamsk Chemical-Technological Institute (branch) of Kazan State Technological University “KNITU”
Russian Federation
Cand. Sci. (Eng.), Associate Prof.
Russian Federation
Cand. Sci. (Eng.), Associate Prof.
A.V. Dmitriev
Nizhnekamsk Chemical-Technological Institute (branch) of Kazan State Technological University “KNITU”
Russian Federation
Dr. Sci. (Eng.), Associate Prof.
Russian Federation
Dr. Sci. (Eng.), Associate Prof.
References
1. Ясавеев Х.Н., Лаптев А.Г., Фарахов М.И. Модернизация установок переработки углеводородных смесей. Казань: Казан. гос. энерг. ун-т, 2004. 307 с.
2. Kolev N., Kralev B., Kolev D. Gas side controlled mass transfer in a new packing with stamped horizontal lamellae operating at extremely low liquid loads // Chemical Engineering and Processing: Process Intensification, 2013. № 63. P.44-49.
3. Maćkowiak J. Model for the prediction of liquid phase mass transfer of random packed columns for gasliquid systems // Chemical Engineering Research and Design, 2011. № 89 (8). P.1308-1320.
4. Bessou V., Rouzineau D., Prévost M., Abbé F., Dumont C., Maumus J.-P., Meyer M. Performance characteristics of a new structured packing // Chemical Engineering Science. 2010. № 65 (16). P.4855-4865.
5. Wei Zhou Jiao, You Zhi Liu, Gui Sheng Qi. Gas Pressure Drop and Mass Transfer Characteristics in a Cross-flow Rotating Packed Bed with Porous Plate Packing // Industrial & Engineering Chemistry Research, 2010. № 49 (8). P.3732-3740.
6. Azzopardi B. J., Mudde R. F., Lo S., Morvan H., Yan Y., Zhao D. Hydrodynamics of Gas-Liquid Reactors: Normal Operation and Upset Conditions, First Edition. Ltd. Published by John Wiley & Sons, 2011.
7. Behnoosh M., Ensieh G.B., Jafar S.M. Experimental study of gas hold-up and bubble behavior in gas-liquid bubble column // Petroleum & Coal, 2009. № 51 (1). P.22-28.
8. Karwa N., Schmidt L., Stephan P. Hydro dynamics of quenching with impinging free-surface jet // International Journal of Heat and Mass Transfer. 2012. № 55 (13-14). P.3677-3685.
Review
For citations:
Madyshev I., Dmitrieva O., Dmitriev A. Prospects of Using Jet-Bubble Contact Facilities to Increase Energy Efficiency of Mass-Exchange Apparatuses. Ecology and Industry of Russia. 2015;19(7):36-39. (In Russ.) https://doi.org/10.18412/1816-0395-2015-7-36-39
Views:
660
Email this article 