Buy (625 RUB)
|Generate QR code
Open Access
Subscription or Fee Access
Investigation into Electrodynamic Separation of Electronic Scrap
https://doi.org/10.18412/1816-0395-2015-4-15-19
Abstract
A problem of complex electronic scrap processing is considered. To assort nonferrous metals, the electrodynamic separation based on the interaction of the magnetic
field with eddy currents induced by this field in conducting particles is most efficient. A pilot sample of the electrodynamic separator based on the linear
induction machine is described shortly. The results of the investigation of the separator for recovery of aluminum alloys from a multicomponent electronic scrap
are presented. Special attention is paid to the selection of manufacturing efficiency indices of electrodynamic separation. A mathematical model and engineering
procedure for calculating efficiency indices are presented. A comparative evaluation of theoretical and experimental data is given. The possibility to calculate the
efficiency indices is confirmed.
field with eddy currents induced by this field in conducting particles is most efficient. A pilot sample of the electrodynamic separator based on the linear
induction machine is described shortly. The results of the investigation of the separator for recovery of aluminum alloys from a multicomponent electronic scrap
are presented. Special attention is paid to the selection of manufacturing efficiency indices of electrodynamic separation. A mathematical model and engineering
procedure for calculating efficiency indices are presented. A comparative evaluation of theoretical and experimental data is given. The possibility to calculate the
efficiency indices is confirmed.
About the Authors
A.Yu. A.Yu. Konyaev
Ural Federal University named after first President of Russia B.N. Yeltsyn
Russian Federation
Russian Federation
professor, doktor texnicheskix nauk, professor kafedry «E'lektrotexnika i e'lektrotexnologicheskie sistemy»
D.N. Bagin
Ural Federal University named after first President of Russia B.N. Yeltsyn
Russian Federation
prepodavatel' instituta voenno-texnicheskogo obrazovaniya i bezopasnosti, aspirant kafedry «E'lektrotexnika i e'lektrotexnologicheskie sistemy»
Russian Federation
prepodavatel' instituta voenno-texnicheskogo obrazovaniya i bezopasnosti, aspirant kafedry «E'lektrotexnika i e'lektrotexnologicheskie sistemy»
N.S. Yakushev
Ural Federal University named after first President of Russia B.N. Yeltsyn
Russian Federation
aspirant kafedry «E'lektrotexnika i e'lektrotexnologicheskie sistemy»
Russian Federation
aspirant kafedry «E'lektrotexnika i e'lektrotexnologicheskie sistemy»
References
1. Лолейт С.И., Стрижко Л.С. Извлечение благородных металлов изэлектронного лома. М.: Руда и металлы, 2009. 156 с.
2. Медведев А., Арсентьев С. Утилизация продуктов производства электроники // Компоненты и технологии. 2008. № 10. С.153-159.
3. Дистанов А.А., Воскобойников В.В. Комплекс для переработки радиоэлектронного лома // Твердые бытовые отходы. 2012. № 5. С.24-26.
4. Коняев И.А., Маркин Н.Е., Удинцев В.Н., Коняев А.Ю. Сепарация металлов из твердых отходов // Экология и промышленность России. 2006. Декабрь. С.8-11.
5. Коняев А.Ю., Назаров С.Л., Казанцев Р.О. и др. Переработка электронного лома: применение электродинамических сепараторов // Твердые бытовые отходы. 2014. № 2. С.26-30.
6. Коняев А.Ю., Назаров С.Л. Исследования характеристик электродинамических сепарато-ров на основе двумерной модели // Электротехника. 1998.
Review
For citations:
A.Yu. Konyaev A., Bagin D., Yakushev N. Investigation into Electrodynamic Separation of Electronic Scrap. Ecology and Industry of Russia. 2015;19(4):15-19. (In Russ.) https://doi.org/10.18412/1816-0395-2015-4-15-19
Views:
519
Email this article 