Buy (625 RUB)
Generate QR code
Open Access
Subscription or Fee Access
Gas Cleaning with Dust Collection Device with Arc-Shaped Elements
https://doi.org/10.18412/1816-0395-2024-2-12-18
Abstract
To solve the issue of gas purification, a new dust collecting device with arc-shaped elements has been proposed. A feature of the device is noted, which consists in the capability of changing the flow area at its inlet by varying the number of rows of arc-shaped elements and their height, which makes it possible to select the inlet gas velocity at which the separation efficiency is maximum. The results of numerical modeling of the process of capturing solid particles from gas for various design solutions and process parameters of the unit are presented. It has been found that the high efficiency of a device with arc-shaped elements at a low pressure drop (no more than 380 Pa) is achieved by creating an arranged wave-like structure of the gas and dust flow, on the basis of which the centrifugal forces of high values arise at relatively low gas velocities at the inlet (0.25–2 m/s). A conclusion was made on the optimal design of the device, which has a height of arc-shaped elements of 250 mm and the number of their rows is 12 pcs.
About the Authors
E.I. Salakhova
Kazan National Research Technological University
Russian Federation
Russian Federation
Senior lecturer
V.E. Zinurov
Kazan State Power Engineering University
Russian Federation
Russian Federation
Assistant
A.V. Dmitriev
Kazan State Power Engineering University
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Head of the Department
O.S. Dmitrieva
Kazan National Research Technological University
Russian Federation
Russian Federation
Cand. Sci. (Tech.), Associate Professor
A.A. Abdullina
Kazan State Power Engineering University
Russian Federation
Russian Federation
Student
References
1. Kok J.F., Storelvmo T., Karydis V.A., Adebiyi A.A., Mahowald N.M., Evan A.T., He C., Leung D.M. Mineral dust aerosol impacts on global climate and climate change. Nature Reviews Earth & Environment. 2023. Vol. 4. P. 71—86.
2. Буренин В.В. Очистка выбросов предприятий нефтегазового комплекса. Neftegaz.RU. 2019. № 4. С. 108—115.
3. Самохвалов Н.М., Виноградов В.В. Очистка газа от пыли щелевым фильтром. Экология и промышленность России. 2022. Т. 26. № 6. С. 10—15.
4. Heidenreich S. Hot gas filtration — a review. Fuel. 2013. Vol. 104. P. 83—94.
5. Huang A.-N., Ito K., Fukasawa T., Yoshida H., Kuo H.-P., Fukui K. Classification performance analysis of a novel cyclone with a slit on the conical part by CFD simulation. Separation and Purification Technology. 2018. Vol. 190. P. 25—32.
6. Xiao G., Wang X., Yang G., Ni M., Gao X., Cen K. An experimental investigation of electrostatic precipitation in a wire-cylinder configuration at high temperatures. Powder Technology. 2015. Vol. 269. P. 166—177.
7. Орлов С.М., Дмитроченкова Э.И., Орлова А.Я. Анализ работы циклона как первой ступени очистки газа от пыли. Вестник Донбасской национальной академии строительства и архитектуры. 2010. № 6 (86). С. 10—15.
8. Иванова В.С., Николенко С.Д., Сазонова С.А., Асминин В.Ф. Физическое моделирование аппарата пылеочистки скруббер Вентури для улучшения условий труда на производствах. Моделирование систем и процессов. 2019. Т. 12. № 1. С. 48—55.
9. Бахронов Х.Ш., Ганиева С.У. Ход развития аппаратов для очистки газов от пыли. Journal of Advances in Engineering Technology. 2022. № 2. С. 33—38.
10. Dmitriev A.V., Zinurov V.E., Dmitrieva O.S. Collecting of finely dispersed particles by means of a separator with the arc-shaped elements. E3S Web of Conferences. 2019. Vol. 126. P. 00007.
11. Zinurov V.E., Kharkov V.V., Salakhova E.I., Vakhitov M.R., Kuznetsov M.G. Numerical simulation of collection efficiency in separator with inclined double-T elements. IOP Conference Series: Earth and Environmental Science. 2022. P. 042024.
12. Salakhova E.I., Dmitriev A.V., Zinurov V.E., Nabiullin I.R., Salakhov I.I. Dust Collector for Paraffin Dehydrogenation Units with a Fluidized Catalyst Bed. Catalysis in Industry. 2022. Vol. 14. № 4. P. 369—375.
13. Salakhova E.I., Zinurov V.E., Dmitriev A.V., Salakhov I.I. Modeling of Erosion in a Cyclone and a Novel Separator with Arc-Shaped Elements. Processes. 2023. Vol. 11. № 1. P. 156.
14. Миньков Л.Л., Дик И.Г. Численное моделирование немонотонной сепарационной кривой гидроциклона. Инженерно-физический журнал. 2012. Т. 85. № 6. С. 1214—1222.
Review
For citations:
Salakhova E., Zinurov V., Dmitriev A., Dmitrieva O., Abdullina A. Gas Cleaning with Dust Collection Device with Arc-Shaped Elements. Ecology and Industry of Russia. 2024;28(2):12-18. (In Russ.) https://doi.org/10.18412/1816-0395-2024-2-12-18
Views:
219
Email this article 