Buy (625 RUB)
|Generate QR code
Open Access
Subscription or Fee Access
Development of a Method for Producing Geoecologically Safe Road Building Materials based on Drill Cuttings
https://doi.org/10.18412/1816-0395-2020-11-19-23
Abstract
The results of studies of obtaining road-building materials based on drill cuttings sampled from the fields of Western Siberia are presented. It was found that there is no excess of the standards for the content of heavy metals in a mobile form in the samples of drill cuttings. The possibility of obtaining cement-soil based on drill cuttings has been studied. In terms of physical and mechanical properties, cement soil samples are characterized by sufficient strength and belong to the M20 brand (the value of the ultimate compressive strength Rz = 3.99 MPa). The strength limit has been reduced to 0.88 MPa after freezing/thawing cycles, which indicates a lack of frost resistance to the resulting material. The use of such cement is possible only in countries characterized by a warm climate with positive temperature values.
About the Authors
A.S. Vlasov
Perm National Research Polytechnic University (PNRPU)
Russian Federation
Post-graduate Student
Russian Federation
Post-graduate Student
K.G. Pugin
Perm State Agro-Technological University, PNRPU
Russian Federation
Dr. Sci. (Eng.), Professor
Russian Federation
Dr. Sci. (Eng.), Professor
K.Yu. Tyuryukhanov
PNRPU
Russian Federation
Lead Engineer
Russian Federation
Lead Engineer
L.V. Rudakova
PNRPU
Russian Federation
Dr. Sci. (Eng.), Head of Department
Russian Federation
Dr. Sci. (Eng.), Head of Department
I.S. Glushankova
PNRPU
Russian Federation
Dr. Sci. (Eng.), Professor
Russian Federation
Dr. Sci. (Eng.), Professor
A.A. Surkov
PNRPU
Russian Federation
Cand. Sci. (Eng.), Assistant Professor
Russian Federation
Cand. Sci. (Eng.), Assistant Professor
References
1. Kujawska J. Potential influence of drill cuttings landfill on groundwater quality-comparison of leaching tests results and groundwater composition. Desalination and Water Treatment. 2016. Vol. 57. P. 1409—1419.
2. Рудакова Л.В., Пичугин Е.А., Шенфельд Б.Е., Елизарова И.А. Оценка геоэкологической устойчивости дорожно-строительного материала на основе бурового шлама. Экология и промышленность России. 2019. Т. 23. №12. С. 48—53.
3. Junttila J., Dijkstra N., Aagaard-Sorensen S. Spreading of drill cuttings and sediment recovery of three exploration wells of different ages, SW Barents Sea, Norway. Marine Pollution Bulletin. 2018. No. 135. P. 224—238.
4. Пичугин Е.А. Оценка воздействия бурового шлама на окружающую природную среду. Молодой ученый. 2013. № 9. С. 122—123.
5. Xu T., Wanga L., Wanga X., Lia T., Zhana X. Heavy metal pollution of oil-based drill cuttings at a shale gas drilling field in Chongqing, China: A human health risk assessment for the workers. Ecotoxicology and Environmental Safety. 2018. No. 165. P. 160—163.
6. Aboutabikh M., Soliman A.M., Naggar M.H. El. Properties of cementitious material incorporating treated oil sands drill cuttings waste. Construction and Building Materials. 2016. No. 111. P. 751—757.
7. Ягафарова Г.Г., Рахматуллин Д.В., Инсапов А.Н. Современные методы утилизации буровых отходов. Нефтегазовое дело. 2018. Т. 16. №. 2. С. 123—129.
8. Mostavi E., Asadi S., Ugochukwu E. Feasibility Study of the Potential Use of Drill Cuttings in Concrete. Procedia Engineering. 2015. No. 118. P. 1015—1023.
9. Abbe O.E., Grimes S.M., Fowler G.D., Boccaccini A.R. Novel sintered glass-ceramics from vitrified oil well drill cuttings. Journal of Materials Science. 2009. No. 44. P. 4296—4302.
10. Kujawska J., Pawłowska M. Effects of Soil-Like Materials Mix from Drill Cuttings, Sewage Sludge and Sawdust on the Growth of Trifoliumpratense L. and Transfer of Heavy Metals. Journal of Ecological Engineering. 2018. V. 19. P. 225—230.
11. Дубинецкий В.В. Буровой шлам как источник сырья для производства строительной керамики пластического формования. Инженерный вестник Дона. 2015. № 4. [Электронный ресурс]. URL: http://ivdon.ru/uploads/article/pdf/IVD_170_Dubinetsky_V._V.pdf_9ab0f1744a.pdf (дата обращения 20.02.2020).
12. Reuben N. Okparanma, Perez P. Araka. Towards enhancing sustainable reuse of pre-treated drill cuttings for construction purposes by near-infrared analysis. A review. Journal of Civil Engineering and Construction Technology. 2018. No. 9. P. 19—39.
13. Власов А.С., Пугин К.Г. Использование бурового шлама в составе асфальтобетона. Матер. XIII Междунар. научно-техн. конф. студентов, аспирантов и молодых ученых "Молодежь и научно-технический прогресс в дорожной отрасли Юга России". 2019. С. 114—118.
14. Власов А.С., Пугин К.Г. Использование бурового шлама для получения цементогрунта. Тр. конгресса c международным участием и конференции молодых ученых "Фундаментальные исследования и прикладные разработки процессов переработки и утилизации техногенных образований". 2019. С. 128—132.
15. Пугин К.Г. Научные основы минимизации негативных воздействий на геосферу при использовании отходов производства в строительстве. Автореф. дис. ... д-р техн. наук. М., 2016. 38 с.
Review
For citations:
Vlasov A., Pugin K., Tyuryukhanov K., Rudakova L., Glushankova I., Surkov A. Development of a Method for Producing Geoecologically Safe Road Building Materials based on Drill Cuttings. Ecology and Industry of Russia. 2020;24(11):19-23. (In Russ.) https://doi.org/10.18412/1816-0395-2020-11-19-23
Views:
586
Email this article 