Buy (625 RUB)
|Generate QR code
Open Access
Subscription or Fee Access
The Technology of Creating Composite Materials on the Ground of Phenolformaldehyde Oligomers and Heat-power Engineering Waste Products
https://doi.org/10.18412/1816-0395-2018-12-22-27
Abstract
The process of TPP fly ash treatment for production of efficient thermal protection composite materials with improved operational characteristics has been presented. One of the methods of rational using fly ash that is formed during coal combustion at thermal power plants is its application as a filler in composite materials. The developed composites based on fly ash and polymer resins form a new class of heat insulating materials that boast higher fire resistance, low density, lower moisture absorption compared with analogues, and high strength. The materials have a broad application range as heat insulators: from small diameter pipelines to industrial facilities. The data obtained by the authors indicate the possibility for safe application of these materials as modern heat retainers for heat insulation of pipeline systems and buildings.
About the Authors
А.Е. Burdonov
Irkutsk National Research Technical University
Russian Federation
Cand. Sci. (Eng.), Associate Professor
Russian Federation
Cand. Sci. (Eng.), Associate Professor
V.V. Barakhtenko
Irkutsk National Research Technical University
Russian Federation
Cand. Sci. (Eng.), Associate Professor
Russian Federation
Cand. Sci. (Eng.), Associate Professor
Е.V. Zelinskaya
Irkutsk National Research Technical University
Russian Federation
Dr. Sci. (Eng.), Professor
Russian Federation
Dr. Sci. (Eng.), Professor
References
1. Рогалев Н.Д., Путилов В.Я. Краткие результаты анализа работы V Междунар. конф. "Золошлаки ТЭС: удаление, транспорт, переработка, складирование" 24—25 апреля 2014 г. Москва, НИУ "МЭИ". Энергосбережение и водоподготовка. 2014. № 3 (89). С. 76—78.
2. Гусейнов К.Б., Мамаев А.М., Велиюлин И.И. Оценка допустимой длины вскрываемого участка газопровода при подготовке его к замене изоляции. Газовая промышленность. 2010. № 1. С. 56—59.
3. Муранова М.М., Щёлоков А.И. Применение современной тепловой изоляции для трубопроводов. Слоистая теплоизоляция. Вестник Самарского государственного технического университета. 2012. № 2 (34). С. 165—169.
4. Акимов М.П., Мордовской С.Д., Старостин Н.П. Определение толщины теплоизоляции и заглубления подземного трубопровода теплоснабжения в многолетнемерзлых грунтах. Инженерно-строительный журнал. 2014. № 2(46). С. 14—23.
5. Зелинская Е.В., Толмачева Н.А., Барахтенко В.В., Бурдонов А.Е. К вопросу рециклинга золы уноса теплоэлектростанций. Современные проблемы науки и образования. 2011. № 6. С. 11—16.
6. Бурдонов А.Е., Барахтенко В.В., Зелинская Е.В., Сутурина Е.О., Бурдонова А.В., Головнина А.В. Физико-механические характеристики композиционных материалов на основе отходов производства с различными рецептурами. Инженерно-строительный журнал. 2012. № 9 (35). С. 14—22.
7. Burdonov A.E., Barakhtenko V.V., Zelinskaya E.V., Yudin V.E., Elokhovskii V.Y. Dynamic mechanical analysis of composite materials based on polyvinyl chloride and thermal power station waste.International Polymer Science and Technology. 2015. Т. 42. № 7. С. T53—T57.
8. Bokern S., Getze J., Agarwal S., Greiner A. Polymer grafted silver and copper nanoparticles with exceptional stability against aggregation by a high yield one-pot synthesis. Polymer. 2011. Т. 52. № 4. С. 912—920.
9. Tinti A., Tarzia A., Passaro R. Thermographic analysis of polyurethane foams integrated with phase change materials designed for dynamic thermal insulation in refrigerated transport. Applied Thermal Engineering. 2014. №70 (1). P. 201—210.
10. Ramírez M., Gómez J.M., Aroca G. Removal of ammonia by immobilized nitrosomonaseuropaea in a biotrickling filter packed with polyurethane foam. Chemosphere. 2009. Т. 74. №10. P. 1385—1390.
11. Silvestre J., Silvestre N., De Brito J. Polymer nanocomposites for structural applications: Recent trends and new perspectives. Mechanics of Advanced Materials and Structures. №23. 2016. P. 1263—1277.
12. Kunaver M., Anžlovar A., Žagar E. The fast and effective isolation of nanocellulose from selected cellulosic feedstocks. Carbohydrate Polymers. № 148. 2016. P. 251—258.
13. Habiba U., Islam Md.S, Siddique T.A. Adsorption and photocatalytic degradation of anionic dyes on Chitosan/PVA/Na-Titanate/TiO2 composites synthesized by solution casting method. Carbohydrate Polymers. № 149. 2016. P. 317—331.
14. Salehi M., Krishnamurthy A., Forster A.M. Polyester composite water uptake and organic contaminant release affected by carbon nanofiber reinforcements. Journal of Applied Polymer Science. № 133.2016.
15. Li Y., Cheng X., Cao W. Fabrication of adiabatic foam at low temperature with sodium silicate as raw material. Materials and Design. № 88. 2015. P. 1008—1014.
Review
For citations:
Burdonov А., Barakhtenko V., Zelinskaya Е. The Technology of Creating Composite Materials on the Ground of Phenolformaldehyde Oligomers and Heat-power Engineering Waste Products. Ecology and Industry of Russia. 2018;22(12):22-27. (In Russ.) https://doi.org/10.18412/1816-0395-2018-12-22-27
Views:
531
Email this article 